Uprated front wishbones with harden rubber bushes. OE Style Balljoints available. You can reuse your old balljoints by drilling the rivets out with an M10 drill then using 3 M10 nuts and bolts to secure the balljoint in the new wishbone on each side.
The bushes are designed to replace the standard oil-filled bushes that can be prone to wear and failure, and the smaller rubber bushes at the front of the wishbone.Unlike polybushes, which require lubrication to prevent squeaking and premature wear, these solid rubber bushes do not need to be lubricated.
**SUPPLIED WITH THE THREADED INSERT FOR THE HEADLIGHT LEVEL SENSOR**
*Please note images are generic and may not show the exact product*
